Garmin GHP 10 Marine Autopilot Corepack NMEA 0183/2000

For motorboat owners who want the ultimate in control and safety, Garmins new GHP 10 autopilot system delivers powerful performance in any sea condition. The GHP 10 is approved for Mercury Verado outboards and works with all types of hydraulically steered powerboats - inboards, outboards and stern drives. The GHP 10s patented Shadow Drive'' technology lets you make manual course changes from the helm without manually disengaging the autopilot or ''wrestling'' the system for control. Simply turn the wheel for an instant course change. Once you have steered the boat onto its new course, release the helm and the GHP 10 will automatically resume control. With its aerospace-derived technology and G-limited gyro turn control, the GHP 10 responds effortlessly and safely at virtually any speed. It can easily be set to hold position against wind, waves or heavy current. Styled to match the Garmin family of marine products, the GHC 10 is a 3.5'' color display and is the dedicated control head for the new GHP 10 autopilot. Up to three GHC 10 controllers can be interfaced to a single GHP 10, allowing autopilot functionality in multiple stations on the boat.  

GHP 10 Autopilot

• Patented Shadow Drive technology - allows users to make manual course changes without manually disengaging the autopilot
• No failure prone rudder angle sensor needed - calculates rudder command from a combination of compass, gyro and engine inputs
• Stress-free turns based on the G-force felt by its included rate gyro
• GHP 10 autopilot includes one GHC 10 helm control display - up to three GHC 10s can be interfaced to a single GHP 10 autopilot system
• Interface: NMEA 2000
• Supply voltage: 10 to 20V

GHC 10 Helm Control Unit

• GHC 10 helm control display has a simple user interface making user operation a cinch
• The Installation wizard helps users to automatically configure the GHC 10.
• Display: 3.5'' TFT, QVGA color LCD display (320 x 240 pixels)
• Unit dimension: 11.1cm H x 10.9cm W x 4.8cm D
• Interface: NMEA 2000 and NMEA 0183
• Users can configure the GHC 10 to automatically turn on when power is applied
• Operating temperature: -15 C to 70 C (5 F to 158 F)
• Supply voltage: 7 to 32V GHP 10 Corepack
• The corepack includes: GHC 10 helm control display, Electronic Control Unit (ECU) , Course Compass Unit (CCU), Shadow Drive'', CCU/ECU interconnect cable, Buzzer, ECU power cable, NMEA 2000 drop cable, NMEA 2000 T-connector

To avoid disappointment please contact our sales desk on 0800 622 6222 or email support@capitalstores.co.uk to confirm availability.

Image Guidelines: This image may be a representation only. Please follow the full item description to ensure this product matches your requirements